Cladding

Lots of 3.6mm ply delivered so I get to work cladding the ceiling, and 2 side walls. All goes fairly smoothly, and I have some flexiply to make more substantial window sills.

 I started off using a staple gun, and find this is not really secure enough, so switch to using a hammer and nails.

I cut a 1 inch strip of plywood and bend it along the top edge, and this nicly finishes it off hiding the not quite perfect cuts.

I can finally now properly fit the surround for the new roof lights. I will use a strip of plywood down the centre to conceal the wires now routed to the back for lighting - you can see a wire hanging at the end and in the 'bathroom'.