News

Long delay since my last report, not to say nothing's been done, just that I haven't written.

So, it's not leaking but there are still issues with a few bits of damaged panel around the bottom, and the seals are not all perfect yet.
But I am now cracking on inside.

Alan has helped with the insulation too, so there is quite a lot of progress to report. Insulation now almost complete to both sides (2 x 20mm, existing and recycled from ceiling and other bits and bobs)

 Before doubling up

After.

And the front (50mm Celotex, 75mm in some parts as there is more space)

And the ceiling (50mm Celotex)

Then adding 3.6mm plywood is quite easy, either staple gun or nails into the timber frame.

I don't have enough plywood to finish but will leave the centre front bit a while as I plan to route wires here.